Analysis of a magnetic field and Hall effects in nanoliquid flow under insertion of dust particles

In this study, the two‐phase hydromagnetic flow of a viscous liquid through a suspension of dust and nanoparticles is considered. The influence of the Hall current is also taken into account. The similarity variables are utilized to transform the problem into one independent variable. The obtained expressions in one independent variable are solved through the Runge–Kutta–Fehlberg scheme connected with the shooting procedure. The computed results are sketched for employing multiple values of physical constraints on the temperature and velocity of the nanofluid and dust phase. The characterization of various nanoparticles like Cu, Al₂O₃, TiO_2, and Ag on velocities and temperatures of both phases is made through plots. A comparative analysis in the limiting approach is presented to justify the present solution methodology. The range of emerging parameters is taken as 0 ≤ l ≤ 3, 0.1 ≤ β_t ≤ 3, 0 ≤ m ≤ 2.5, 0 ≤ M² ≤ 2, 0.1 ≤ β_v ≤ 3, 0 ≤ ? ≤ 0.4, and ?0.8 ≤ λ ≤ 0.8. From the study, it is revealed that β_t has the opposite effect on the temperature of dust and nanofluid phases. The Hall parameter m raises the profiles of velocities in the nanoliquid and dust phases. Also, it is found that the transverse velocities h(η) and H((η) and temperatures θ(η) and θ_p(η) rise for larger ?.     

正偏心正交车铣精加工切削层几何形状研究

针对未考虑正偏心正交车铣切削层几何形状而导致难以全面反映正交车铣切削层几何形状变化规律的问题，基于正交车铣运动规律，在不考虑动力学影响的情况下，对切削层的形成过程进行了静态分析。建立的正偏心正交车铣切削层几何形状的解析模型涉及铣刀侧刃和底刃的切入/切出角度、切削厚度和切削深度。通过试验验证了该解析模型的正确性，并分析了切削参数对铣刀切削层的影响。研究结果为正偏心正交车铣切削层几何形状的变化提供了定量的分析依据，为切削力和颤振的研究提供了理论指导。     

Realization of 1 μm thick,crack-free and smooth PMN-PT film in the MPB through PLD: A comprehensive study

This paper presents a comprehensive study on the various hurdles and solutions in the realization of phase pure, pinhole-free and crack-free, 0.65PMN-0.35PT/LSCO/Pt/TiO₂/SiO₂/Si heterostructures using pulsed laser deposition. A few major inquiries were i) effect of excess PbO in the target, ii) modulation of deposition and annealing temperatures for the growth of LSCO buffer layer, iii) thickness of the buffer layer iv) effect of the flow of oxygen in the chamber during and after deposition and v) the annealing conditions; on the phase formation, morphology and leakage response demonstrated by the films. Ferroelectric response parameters viz. P_sat = 47.7 μC/cm², P_r = 20.03 μC/cm², E_C = 62.03 kV/cm and absolute area = 21460 units attest the quality of the grown film.     

高大软岩边坡下开采程序研究

结合胜利煤田发生大型滑坡的露天矿地质赋存条件，以高大软岩边坡条件下松散物料压覆的煤炭资源安全高效回收为目标，提出采用“横采内排-尾随压脚”的开采程序方案将工作线从直线型变为“Π”字型。从地表水与地下水防治、边坡安全监测等方面提出了保证工程顺利实施的安全保障措施。计算分析了采用“横采内排-尾随压脚”开采程序方案的可观资源回收量及减少运距和提升高度带来的经济效益，同时对矿山实现可持续发展和安全开采的价值进行了预测。     

Effect of Reynolds number and boundary layer thickness on the performance of V-cone flowmeter using CFD

The effect of Reynolds number and boundary layer thickness on the performance of V-cone flowmeter has been evaluated using computational fluid dynamics (CFD). The shear stress transport k-ω (SST k-ω) turbulence model has been adopted for closure. The performance of two V-cone flowmeters with different beta ratios (β) viz., 0.6 and 0.7 for a fixed vertex angle (ϕ) of 60° has been analysed as a function of Reynolds number (Re). The results show that the coefficient of discharge (C_d) increases with Reynolds number in the laminar and transition flow regimes whereas it is nearly constant in turbulent flow regime. From the results, it can be concluded that C_d is independent of Re for values equal to 4000 and beyond. Further, it is also seen that the performance of the V-cone flowmeter is not affected by the upstream boundary layer thickness if the velocity profiles having different boundary layer thickness are extracted from an axial distance of 10D and more are fed at 5D upstream of the meter. However, the meter is sensitive to the extracted velocity profile from an axial distance of 5D and uniform velocity profile being fed at 5D upstream. The value of C_d may be sensitive as a result of the pressure variation due to the obstruction.     

Electrical conductivity of poly(vinyl alcohol)/carbon nanotube multilayer thin films: Influence of sodium polystyrene sulfonate mediated carbon nanotube dispersion

This investigation was aimed to enhance the dispersibility of multi-walled carbon nanotubes (MWCNT) using sodium polystyrene sulfonate (Na-PSS) polyelectrolyte. Subsequently, electrically conducting, multi-layer thin films are prepared utilizing layer by layer assembly method with poly(vinyl alcohol) as a host matrix. The highest extent of MWCNT dispersion was observed in MWCNT:Na-PSS ratio of 1:9 (wt/wt), which was estimated from UV-Vis spectroscopic analysis. Zeta potential measurements of Na-PSS modified MWCNT dispersion showed large negative potentials ranging from −52 to −64 mV in the most stable pH range of 4 to 10, suggesting the colloidal stability is due to the long-range repulsive nature of electrostatic interactions from negatively charged sulfonate groups. Complementary molecular dynamics simulations showed that adsorption of Na-PSS imparts a large negative potential to the carbon nanotube surface, which increases with an increase in Na-PSS concentration. The multi-layer thin film of (1:9) MWCNT:Na-PSS exhibited a DC electrical conductivity of 2.96 × 10² S/m.     

高瓦斯矿井回采工作面瓦斯综合抽采技术实践

为了解决高瓦斯矿井工作面瓦斯涌出量大、瓦斯浓度高,制约工作面安全生产的问题,以亨元煤业为背景,结合矿井开采及瓦斯地质条件,确定了本煤层顺层钻孔抽采、穿层钻孔抽采邻近层和覆岩裂隙带瓦斯、以及对上隅角布置抽采管路进行抽采的综合治理方法。试验表明,工作面开采期间瓦斯涌出正常,上隅角瓦斯浓度保持在0.56%以下,实现了工作面安全高效开采。     

Study of haze emission efficiency based on new co-opetition data envelopment analysis

As haze intensifies in China, controlling haze emission has become the country's top priority for environmental protection. Because haze moves across different regions, it is necessary to develop a data envelopment analysis (DEA) model underpinned by both competition and cooperation to evaluate the haze emission efficiency in different provinces. This study innovatively adopts the spatial econometrics to construct the co-opetition matrices of Chinese provinces, then builds the co-opetition DEA model to evaluate the haze emission efficiency of them, and finally uses the haze data of 2015 as an example to assess the applicability of the model. The results of the study include the following: First, compared with the traditional CCR (A. Charnes & W. W. Cooper & E. Rhodes) model, this study constructs the co-opetition DEA cross-efficiency model that integrates haze's feature of cross-border moving; thus, it is more in line with the reality of haze emission and movement. Second, compared with the efficiency value gained from the CCR model, the haze emission efficiency values for Tianjin and Guangdong, two decision-making units, register greater variance when using the DEA model. The reason might lie in that they have a different spatial transportation relationship with their surrounding provinces. Third, the haze emission efficiency of provinces, according to the evaluation based on the co-opetition DEA method, varies greatly: Those with high efficiency are mostly inland provinces with slow economic growth and adverse climatic conditions, whereas many of the provinces with low efficiency are located in the relatively prosperous East China. The specific co-opetition DEA model constructed in this study enriches the research on the DEA model, which can be applied to the emission efficiency evaluation of similar pollutants around the world and can contribute empirical support to the haze reducing efforts of the government with its empirical results.     

二甲苯吸附分离装置吸附塔压力控制的优化

介绍了二甲苯吸附分离装置模拟移动床工艺技术,针对吸附塔压力控制初期难以满足要求的问题,通过分析工艺过程和压送循环流量控制的特点,对压送循环流量控制进行了优化,解决了压送循环流量在区域切换时无法稳定控制的问题;采用A/B塔塔底压力的交叉控制策略,使得吸附塔压力始终保持稳定,满足控制精度要求。     

克拉苏构造带盐下超深层储层的构造改造作用与油气勘探新发现

塔里木盆地克拉苏构造带油气群下白垩统巴什基奇克组埋深超过6 000 m,储层基质渗透率低,裂缝普遍发育,构造对储层的改造作用明显,但博孜9井的勘探突破反映出不同区带间构造改造作用差异较大、非均质性极强,重新认识构造对储层的改造作用对于预测超深层储层、指导油气勘探生产具有重要的意义。为此,基于钻井取心、构造平衡恢复、裂缝充填物同位素测年、区块应力数值模拟等资料,结合流体包裹体、声发射古应力、铸体薄片等实验分析方法,从定性分析到定量计算、研究了克拉苏构造带油气群超深层储层的构造改造作用及其差异性。研究结果表明:①北部天山造山带及南部古隆起控制了该构造带储层的沉积格局及差异构造变形,形成巴什基奇克组储层"西薄东厚"的分布特征;②博孜区段古应力最小,构造变形主要为正向挤压、逆冲传播,局部井区为斜向压扭;③大北区段主要为斜向压扭,古应力较小,构造变形为逆冲叠置;克深区段古应力最大,构造变形主要为正向挤压、后缘逆冲抬升、前缘滑脱收缩;④差异构造变形使同一构造带不同构造变形样式的构造减孔量呈现出较大的差别,且控制了不同区段造缝期与成岩胶结的叠加影响、中晚期裂缝网络与油气成藏期的配置关系,加剧了储层的非均质性,是区段间产能差异的基础改造因素;⑤现今构造应力的大小及方向影响裂缝有效性,南部为强挤压应力区,背斜相对高部位裂缝走向与现今应力交角较小,裂缝有效性最好;⑥构造成岩环境决定了构造裂缝充填物的类型,北部区块以淡水—半碱水介质成岩环境为主,裂缝充填物类型为方解石,有利于对储层进行酸化压裂改造。